Vehicle Exhaust Extraction
Discover our range of products. WORKY solutions at your service.
Hose Reels
Hose Reels
Learn moreFans
Fans
Learn moreRails
Rails
Learn moreNozzles
Nozzles
Learn moreAccessories
Accessories
Learn moreFloor Traps
Floor Traps
Learn moreHigh temperature arms
High temperature arms
Learn moreGrolly
Grolly
Learn moreMiniset
Miniset
Learn moreSystems solutions
Systems solutions
Learn moreSliding elements
Sliding elements
Learn more
Vehicle Exhaust Extraction
Extracting exhaust fumes of motor vehicles from the work area prevents them being released into the work environment and becoming a health hazard for the operator.
A good exhaust extraction system has to collect the fumes at the production point (exhaust pipe of the vehicle) and has to convey them outside the building to be expelled into the atmosphere. Unfortunately, harmful gases such as carbon monoxide (CO), unburnt hydrocarbons (HC), and nitrogen dioxide (NOX), are cancerogenic and hidden killers … they are so impalpable and are so difficult to detect that they cannot be filtered but have to be removed by direct extraction.
Learn more
Stop the problem of vehicle exhaust fumes extraction
A good exhaust fumes extractoon system must aspirated exhaust gases picking them to the source of production, before they can escape from the vehicle muffler.
This is the reason why WORKY exhaust fumes extraction systems are shaped as big pipes attached to the muffler whence they withdraw directly all the exhaust fumes as soon as they are issued, carrying gases outside, pouring in the atmosphere.
WORKY exhaust fume extraction system
A WORKY exhaust fumes extraction system guarantees the quality you are looking for at the right price with professional products that are tailored to the world of repair workshops. Check out the service, competence and professionalism of WORKY operators.
We have the right installation solutions for all the types of bodyshops, small or big: according to the type of assistance services the bodyshop gives, we find the most proper vehicle exhaust extraction system among those flowing system, fixed, underfloor and stand halo.
We always are by the side of the shop to provide the bespoken solution and we realize three-dimensional projects and layout specifically built on the bodyshop’s requests.
WORKY products for your industry
The SLIDING ELEMENTS are products that have been designed to extract exhaust fumes from many work positions because they can move from one work area to another by running along the aluminium rail.
The MINISETs are the simplest expression of a fixed fume extraction system. They consist of a fan, hose and nozzle for intercepting the fumes.
This type of product is completed by inserting a fume expulsion chimney from the premises in which it is fitted and by fitting a fan with a start/stop switch.
Choosing the right model is the only thing left to decide and the WORKY Sales Department is there to provide you with expert assistance.
The floor traps of the WORKY range are made of a tough metal sheet using a special galvanizing process which ensures durability and resistance to corrosion.
The range is divided into two categories: GFT-B that have a bend to be inserted into the floor trap when it is required to extract the exhaust fumes; whereas the GFT-BR has an underfloor bend where a flexible hose is housed. It is erected when the extraction has to be run.
The extruded aluminium rails of the GAT series consist of modular 4m bars with 2 rubber lips that enable them to close completely when the fan is running.
The product has been made in 2 versions to respond better to light-duty (GAT1) applications or to situations where a greater air flow is required (GAT2). Both versions are made of aluminium to combine stiffness and lightness and their modular design enables systems of the desired length to be created.
WORKY’s GSA fans have been specially designed to extract WORKY has developed a range of mobile exhaust fume extractor to extract fumes from the work area without having to provide a permanent installation.Each Grolly model has to be completed with a 10m expulsion hose to be able to operate correctly.
The accessories in WORKY range of products for the extraction of fumes and gases are designed to connect, disconnect, split, join, support, or close the extraction systems.
In this regard, there are different types of rubber or fiberglass hoses and aluminum or PVC pipes which are suitable for every requirement. Fittings and couplings are expressly designed for the various cases when exhaust gases are to be extracted.
Vehicle exhaust hose reels that are rewound by a motor or by a spring are the solution that has been most widely used traditionally for extracting fumes through a flexible hose and a nozzle. These are exhaust hose reels that are rewound by means of a control panel (GER) or remote control (GERT).
WORKY’s GSA fans have been specially designed to extract smoke and gases from medium pressure systems.
All WORKY workshop exhaust fan have an impeller that is statically and dynamically balanced in order to eliminate vibrations and wear. Each fan is epoxy powder painted in a steel outer casing. Thanks to centrifuges and direct coupling of the motor to ensure optimum efficiency (certified to IEC 60034-30-2011) and durability.
WORKY designs and produces fume arms for extracting systems for a wide range of industrial applications that guarantee 100% resistance, durability, and great performances even for high volumes of fumes production.
The SLIDING ELEMENTS are products that have been designed to extract exhaust fumes from many work positions because they can move from one work area to another by running along the aluminium rail.
The MINISETs are the simplest expression of a fixed fume extraction system. They consist of a fan, hose and nozzle for intercepting the fumes.
This type of product is completed by inserting a fume expulsion chimney from the premises in which it is fitted and by fitting a fan with a start/stop switch.
Choosing the right model is the only thing left to decide and the WORKY Sales Department is there to provide you with expert assistance.
The floor traps of the WORKY range are made of a tough metal sheet using a special galvanizing process which ensures durability and resistance to corrosion.
The range is divided into two categories: GFT-B that have a bend to be inserted into the floor trap when it is required to extract the exhaust fumes; whereas the GFT-BR has an underfloor bend where a flexible hose is housed. It is erected when the extraction has to be run.
The extruded aluminium rails of the GAT series consist of modular 4m bars with 2 rubber lips that enable them to close completely when the fan is running.
The product has been made in 2 versions to respond better to light-duty (GAT1) applications or to situations where a greater air flow is required (GAT2). Both versions are made of aluminium to combine stiffness and lightness and their modular design enables systems of the desired length to be created.
WORKY’s GSA fans have been specially designed to extract WORKY has developed a range of mobile exhaust fume extractor to extract fumes from the work area without having to provide a permanent installation.Each Grolly model has to be completed with a 10m expulsion hose to be able to operate correctly.
The accessories in WORKY range of products for the extraction of fumes and gases are designed to connect, disconnect, split, join, support, or close the extraction systems.
In this regard, there are different types of rubber or fiberglass hoses and aluminum or PVC pipes which are suitable for every requirement. Fittings and couplings are expressly designed for the various cases when exhaust gases are to be extracted.
Vehicle exhaust hose reels that are rewound by a motor or by a spring are the solution that has been most widely used traditionally for extracting fumes through a flexible hose and a nozzle. These are exhaust hose reels that are rewound by means of a control panel (GER) or remote control (GERT).
The extruded aluminium rails of the GAT series consist of modular 4m bars with 2 rubber lips that enable them to close completely when the fan is running.
The product has been made in 2 versions to respond better to light-duty (GAT1) applications or to situations where a greater air flow is required (GAT2). Both versions are made of aluminium to combine stiffness and lightness and their modular design enables systems of the desired length to be created.
WORKY’s GSA fans have been specially designed to extract smoke and gases from medium pressure systems.
All WORKY workshop exhaust fan have an impeller that is statically and dynamically balanced in order to eliminate vibrations and wear. Each fan is epoxy powder painted in a steel outer casing. Thanks to centrifuges and direct coupling of the motor to ensure optimum efficiency (certified to IEC 60034-30-2011) and durability.
Toughness, flexibility, durability: flexible hoses have to be all these things and WORKY uses the best technology for the best product.Reinforced rubber construction with crush-proof nylon reinforcement, smooth in the inner part to minimize friction and air turbulence during extraction. Maximum temperature of 200°C, which is the the very top of what the market can provide.
WORKY designs and produces fume arms for extracting systems for a wide range of industrial applications that guarantee 100% resistance, durability, and great performances even for high volumes of fumes production.
The SLIDING ELEMENTS are products that have been designed to extract exhaust fumes from many work positions because they can move from one work area to another by running along the aluminium rail.
The extruded aluminium rails of the GAT series consist of modular 4m bars with 2 rubber lips that enable them to close completely when the fan is running.
The product has been made in 2 versions to respond better to light-duty (GAT1) applications or to situations where a greater air flow is required (GAT2). Both versions are made of aluminium to combine stiffness and lightness and their modular design enables systems of the desired length to be created.
WORKY’s GSA fans have been specially designed to extract WORKY has developed a range of mobile exhaust fume extractor to extract fumes from the work area without having to provide a permanent installation.Each Grolly model has to be completed with a 10m expulsion hose to be able to operate correctly.
The accessories in WORKY range of products for the extraction of fumes and gases are designed to connect, disconnect, split, join, support, or close the extraction systems.
In this regard, there are different types of rubber or fiberglass hoses and aluminum or PVC pipes which are suitable for every requirement. Fittings and couplings are expressly designed for the various cases when exhaust gases are to be extracted.
Vehicle exhaust hose reels that are rewound by a motor or by a spring are the solution that has been most widely used traditionally for extracting fumes through a flexible hose and a nozzle. These are exhaust hose reels that are rewound by means of a control panel (GER) or remote control (GERT).
WORKY’s GSA fans have been specially designed to extract smoke and gases from medium pressure systems.
All WORKY workshop exhaust fan have an impeller that is statically and dynamically balanced in order to eliminate vibrations and wear. Each fan is epoxy powder painted in a steel outer casing. Thanks to centrifuges and direct coupling of the motor to ensure optimum efficiency (certified to IEC 60034-30-2011) and durability.
The nozzles are the expression of the professionalism and completeness of WORKY’s fume extraction product range.
The fume extraction device plays a fundamental role because, if it cannot follow the innumerable shapes and positions of the exhaust pipes of vehicles, the entire system will be pointless.The nozzles are the expression of the professionalism and completeness of WORKY’s fume extraction product range.
The fume extraction device plays a fundamental role because, if it cannot follow the innumerable shapes and positions of the exhaust pipes of vehicles, the entire The nozzles are the expression of the professionalism and completeness of WORKY’s fume extraction product range.
The fume extraction device plays a fundamental role because, if it cannot follow the innumerable shapes and positions of the exhaust pipes of vehicles, the entire system will be pointless.
WORKY designs and produces fume arms for extracting systems for a wide range of industrial applications that guarantee 100% resistance, durability, and great performances even for high volumes of fumes production.
The SLIDING ELEMENTS are products that have been designed to extract exhaust fumes from many work positions because they can move from one work area to another by running along the aluminium rail.
The MINISETs are the simplest expression of a fixed fume extraction system. They consist of a fan, hose and nozzle for intercepting the fumes.
This type of product is completed by inserting a fume expulsion chimney from the premises in which it is fitted and by fitting a fan with a start/stop switch.
Choosing the right model is the only thing left to decide and the WORKY Sales Department is there to provide you with expert assistance.
The floor traps of the WORKY range are made of a tough metal sheet using a special galvanizing process which ensures durability and resistance to corrosion.
The range is divided into two categories: GFT-B that have a bend to be inserted into the floor trap when it is required to extract the exhaust fumes; whereas the GFT-BR has an underfloor bend where a flexible hose is housed. It is erected when the extraction has to be run.
The extruded aluminium rails of the GAT series consist of modular 4m bars with 2 rubber lips that enable them to close completely when the fan is running.
The product has been made in 2 versions to respond better to light-duty (GAT1) applications or to situations where a greater air flow is required (GAT2). Both versions are made of aluminium to combine stiffness and lightness and their modular design enables systems of the desired length to be created.
WORKY’s GSA fans have been specially designed to extract WORKY has developed a range of mobile exhaust fume extractor to extract fumes from the work area without having to provide a permanent installation.Each Grolly model has to be completed with a 10m expulsion hose to be able to operate correctly.
The accessories in WORKY range of products for the extraction of fumes and gases are designed to connect, disconnect, split, join, support, or close the extraction systems.
In this regard, there are different types of rubber or fiberglass hoses and aluminum or PVC pipes which are suitable for every requirement. Fittings and couplings are expressly designed for the various cases when exhaust gases are to be extracted.
Vehicle exhaust hose reels that are rewound by a motor or by a spring are the solution that has been most widely used traditionally for extracting fumes through a flexible hose and a nozzle. These are exhaust hose reels that are rewound by means of a control panel (GER) or remote control (GERT).
Request a free consultation
Expertise, professionalism and services: WORKY Technicians always at your side
